Quick Fix Plus 6.3 Synthetic Urine

Quick Fix® 6.3: The original and finest premixed synthetic urine. Our patented formula replicates human urine perfectly with ideal levels of specific gravity, uric acid, pH, and creatinine. Get the complete 3oz kit for quick and easy readiness in minutes.

Directions

1. Activate the hand warmer before heating Quick Fix® Plus (it may take 30-45 minutes for the hand warmer to heat up).
2. Shake the Quick Fix® Plus bottle and microwave on high for 7-10 seconds. The temperature strip should display a green dot in a range of 94° – 100°F. The synthetic urine is overheated if the bottle feels warm in your hand but does not show a reading on the temperature strip. Let it cool down gradually until you see a reading on the temperature strip. If the synthetic urine temperature is below 94°, heat again in the microwave for a few more seconds until you see the green dot on the temperature strip between 94° – 100°F.
3. Attach the hand warmer with tape or a rubber band to the back of the bottle opposite the temperature strip. This will provide prolonged heat, keeping the bottle temperature near 100°F for approximately five hours.
4. If you can’t microwave the Quick Fix® Plus, attach the hand warmer to the bottle at least 1 hour before use. Shake the bottle before and after heating and before pouring into the cup. **If your product remains unused, it can be reheated repeatedly.
5. Always check your batch number in the batch validation tool on our home page before using the product. Batch numbers are printed on the bottle. Expired products will be exchanged for retail customers at no charge